ACPI thermal zone ACPI\ThermalZone\TZS0 has been enumerated. _PSV = 371K _TC1 = 0 _TC2 = 50 _TSP = 0ms _AC0 = 0K _AC1 = 0K _AC2 = 0K _AC3 = 0K _AC4 = 0K _AC5 = 0K _AC6 = 0K _AC7 = 0K _AC8 = 0K _AC9 = 0K _CRT = 373K _HOT = 0K _PSL - see event data.
Having a look at the above event data, this is the thermal zone data for the TZS0 sensor. Without having other more detailed event data logs aside from this, I can only assume this is the sensor for the CPU. The reason for this is the _PSL child object is used to list the processors in the thermal zone. If we saw _TZD instead of _PSL, this would list the non-processor devices in the thermal zone. For the moment however, we'll just assume the entire system was overheating as this was a really hot laptop. Let's go down the line:
_PSV - Indicates the temperature at which the operating system started passive cooling control. In our case here, this was 371K (K = Kelvin). 371 Kelvin is 97.85 Celsius. The system we're dealing with in this post is an Acer Aspire 5740G, which according to tech specs houses an i5 430m for its processor. If we consult the manual:
PROCHOT# is Intel's thermal throttle activity bit:
Note it states - The TCC will remain active until the system deasserts PROCHOT#. In fancy software engineer talk, this simply means that so long as the temperatures continue to rise (or doesn't drop), it will continue to lower power consumption from the CPU until it's in a safe spot. The downside to this is in extreme situations of overheating (like this one here), we trip because we hung around at an unsafe operational temperature for too long (or got higher) and shut down to prevent permanent damage.
_TC1/2 - These are both known as the Thermal Constants, which are essentially objects used to evaluate the constants _TC1/2 for use in the passive cooling formula.
Performance [%]= _TC1 * ( Tn -Tn-1 ) + _TC2 * (Tn. - Tt)
The return value is an integer containing Thermal Constant #'s 1 or 2. In our case, our return value was 50 for _TC2.
_TSP - Evaluates to a thermal sampling period (in tenths of seconds) used by Operating System-directed configuration and Power Management (OSPM) to implement the passive cooling equation. This value, along with _TC1 and _TC2, will enable OSPM to provide the proper hysteresis required by the system to accomplish an effective passive cooling.
In our case, this was 0ms.
_AC(x) - This optional object, if present under a thermal zone, returns the temperature trip point at which Operating System-directed configuration and Power Management (OSPM) must start or stop active cooling, where (x) is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
In our case, we can see it does go 0-9, and all is listed as 0 Kelvin.
_CRT - Indicates the temperature at which the operating system will shut down as it simply cannot throttle (passive) or use fans (active) to succeed in cooling these temperatures in time before permanent damage. In this case, we can see it's 373k (373 Kelvin) when this occurred, which is 99.85 Celsius. Unsure as to why this is 99.85 and not 100 in our case, but I digress. Possibly it rounded up?
_HOT - Indicates the return value (temperature) at which Operating System-directed configuration and Power Management (OSPM) may choose to transition the system into the S4 sleeping state.
In any case, all we know is that this laptop was having some serious overheating problems. It was occurring mostly overnight when the system was being awoken from sleep to perform a defrag. The defrag was enough to push it to throttle/shutdown temperatures, which was also throwing bug checks as Windows wasn't happy it couldn't defrag.
Thanks for reading, and hopefully more info on thermal zones in the near future.
Advanced Configuration and Power Interface Specification
Intel® Atom™ Processor 330 Series Datasheet